Specials

Manufacturers


  Home > Thermostats > Venstar Thermostats >

Venstar ACC0400 Remote Indoor/Outdoor Sensor
Venstar ACC0400 Remote Indoor/Outdoor Sensor


 


Quantity in Stock:6

Product Code: VENACC0400

Same Day Processing

Your Order Processes And Ships Out The Same Day If In Stock And Ordered Before 3 PM Eastern Mon-Fri [Add $3.00]

Call For Pricing  
Description
 

The Venstar ACC0400 can be used as an indoor or outdoor
sensor for many of the Venstar Thermostats

Features

It can be used with the T1100FS, T1700, T1800, T1900, T2700, T2800, T2900, T2300FS or TSTATEZ thermostats. 

The high and low outdoor air readouts for the day can be displayed on the T1800, T1900, T2800 and T2900 thermostats.

When used as remote room sensor, the accessory can be used with the Venstar T1800, T1900, T2700, T2900, T2900SCH and T2300FS thermostats. The sensor may sense room temperature where it is installed. The thermostat will control to the remote temperature sensor reading and show a blinking degree icon next to the temperature display on the thermostat.

 [Owner's Manual]  [Submittals]

STANDARD FEATURES:
• Sensor can be used to measure indoor or outdoor air temperature.
• If used indoors as a remote temperature sensor, the sensor will read room temperature and send the
    information to the thermostat.
• If used outdoors, the sensor can be used to provide outside temperature information (which is not used
    to control heating or cooling).
• Acceptable Wire Types: CAT5, CAT5e, or CAT6 network communication cable, unshielded with 4
    twisted pairs of 24 gauge solid wire
• Maximum distance between sensor and thermostat using 24 gauge wire — 250 ft

Sensor only, wire not included



Share your knowledge of this product. Be the first to write a review »
©  DBM Control Distributors Inc. • All Rights Reserved •Built with Volusion