Home > Parts > Furnace Repair Parts >

Honeywell Pilot Control Conversion Kit Y8610U6006
Honeywell Pilot Control Conversion Kit Y8610U6006

Alternative Views:

Our Price: $286.41

Quantity in Stock:10

Product Code: HONY8610U6006

Same Day Processing

Your Order Processes And Ships Out The Same Day If In Stock And Ordered Before 3 PM Eastern Mon-Fri [Add $3.00]

Complete kits converting conventional standing pilot system to intermittent pilot system. For use with 24 Vac gas-fired atmospheric furnaces, boiler and heating appliances.
HONEYWELL Y8610U6006 Y-pack containing: S8610U3009 and VR8304M with 1/2 inch by 3/4 inch inlet/outlet, 
flange kit, LP conversion kit
• Y8610U kits are for use with natural or LP gas: provides 100 percent pilot gas shutoff if pilot fails to light; after 6-minute delay, trial for ignition is repeated. 
• Ignition trail/delay sequence is repeated until the appliance lights or call for heat is removed.

Ignition System TypeIntermittent Pilot
Ignition SequenceContinuous retry, after trial for ignition, pilot gas shuts off for 5 minutes, then another trial for pilot ignition takes place
Typical Gas ControlVR8204, VR8304
Type of GasNatural or LP
Flame SenseSingle Rod or Two Rods
Ignition SourceInternal high voltage spark generator
PrePurge0 or 30 seconds
Ignition Trials To Lockoutcontinuous retry
Lockout Timing15 or 90 seconds
Ignition Trial Time (sec)15 or 90 seconds
Maximum Valve Load @ 24 Vac (Amps)1A Pilot, 2A Main @ 24Vac
Typical Ignition HardwareQ345, Q3451
Dimensions (in.)3 15/16 in. high x 5 7/16 in. wide x 2 5/8 in. deep
Dimensions (mm)100 mm high x 138 mm wide x 67 mm deep
Electrical Ratings24 Vac
Frequency60 Hz
Maximum Ambient Temperature (F)-40 F to +165 F
Maximum Ambient Temperature (C)-40 C to +74 C
IncludesVR8304M3558 (1/2 x 3/4; 3.5" setting; 270kBtu/hr at 1 in. p.d.)
Flame Failure Response Time (sec)2.0 sec

Share your knowledge of this product. Be the first to write a review »
©  DBM Control Distributors Inc. • All Rights Reserved •Built with Volusion